NPS-H Non-bitumen-based polymer self-adhesive film (pre-paved) waterproof membrane
The waterproof membrane is made with pre-paved full bonding installation and does not require full bonding of the protection layer and the structure.
Aichuang NPS-H non-bitumen-based polymer self-adhesive film (prepared) waterproof membrane is a polymer waterproof membrane that is made by compositing HDPE with water-resistant and ultraviolet-resistant polymer gel with a special process.
① High strength: It can effectively prevent breakage or puncture without a protection layer and can be poured with concrete after being bound with steel reinforcements.
② Full bonding with structural layer: It can form permanent bonding with concrete to achieve high bonding strength and good water-locking effect and also can prevent moisture from seeping into the structure effectively.
③ Preventing damages caused by foundation settlement to the waterproof layer: With foundation settlement, the protection layer can tear the traditional waterproof layer. The materials with pre-paved full bonding installation can be bonded with the structure to avoid damage.
④ Shorter work period: The pre-paved full bonding installation has low requirements for the base surface and shortens the work period by 1/3 compared with common membranes.
High strength, high bonding force, transverse-flowing water prevention, convenient application
Thickness | 1.2mm | 1.7mm | 2.0mm |
Width | 2000mm |
NO. | Item | Index | |
Pre-paved P | |||
1 | Tension | Tension/(N/50mm) ≥ | 500 |
Elongation at break of membrane, % ≧ | 400 | ||
Elongation at maximum tension/%≥ | —— | ||
2 | The tear strength of nail rod/N≧ | 400 | |
3 | Channel control system | 0.6Mpa, no water running |
Applicable to parts subjected to pre-paved full bonding installation
SynerSeal Waterproofing Materials Co., Ltd. is a large Chinese enterprise specializing in the research and development of waterproof material technology. The company was established in 2017 with a registered capital of 50 million Chinese yuan and a total area of approximately 30,000 square meters. Our company’s main products include crack-resistant stickers, road crack ssealants, high-quality waterproofing membranes, waterproofing coatings, etc.
We will contact you within 1 working day, please pay attention to the email with the suffix “@synerseal.com”.